Van điều khiển VPPM-12L-L-1-G12-0L6H-V (575240)
Thông số kỹ thuật van điều khiển Festo VPPM-12L-L-1-G12-0L6H-V – Festo 575240 proportional pressure
đại lý VPPM-12L-L-1-G12-0L6H-V – đại lý 575240
nhà phân phối VPPM-12L-L-1-G12-0L6H-V – van điều khiển tỉ lệ festo 575240
| Đường kính ngoài mm ventilation [mm] |
12 |
| Đường kính ngoài mm venting [mm] |
12,0 |
| Kiểu truyền động |
Điện |
| Niêm phong |
Soft |
| Nguyên lý hoạt động |
arbitrary |
| Thiết lập |
Pre-controlled membrane control valve |
| Short circuit resistance |
for all electrical connections |
| Safety instructions |
Safety position VPPM: For supply line break, the output pressure is retained uncontrolled. |
| Reverse polarity protection |
for all electrical connections |
| Đặt lại cài đặt |
Mechanical spring |
| Loại điều khiển |
pilot operated |
| Chức năng van |
3-way proportional pressure regulator valve |
| Display type |
LED |
| Pressure regulation range [bar] |
0.06 to 6 |
| Input pressure 1 [bar] |
0 to 8 |
| Max. pressure hysteresis [bar] |
0,03 |
| Tốc độ dòng dòng khí [l/min] |
4.500 |
| Operating voltage range DC [V] |
21.6 to 26.4 |
| Max. power input [mA] |
500 |
| Thời gian bật nguồn |
100 % |
| Max. electrical power consumption [W] |
12 |
| residual ripple |
10 % |
| Vận hành |
Compressed air to ISO 8573-1:2010 [7:4:4]Inert gases |
| Thông tin về phương tiện vận hành và kiểm soát |
Oiled operation not possible |
| Cấp phép bởi |
RCM mark |
| KC-mark |
KC-EMV |
| CE certificate (see declaration of conformity) |
to EU EMC directive |
| Lớp chống ăn mòn KBK |
2 – moderate corrosion stress |
| Nhiệt độ trung bình [°C] |
10 to 50 |
| Cấp bảo vệ |
IP65 |
| Nhiệt độ môi trường xung quanh [°C] |
0 to 60 |
| Khối lượng [g] |
2.050 |
| Linearity error FS [%] |
1 |
| Temperature coefficient [%/K] |
0,04 |
| Repeatability FS [%] |
0,5 |
| Điện connection |
M12 |
| Loại buộc |
With throughway bores |
| Ren nối khí 1 |
G1/2 |
| Ren nối khí 2 |
G1/2 |
| Ren nối khí 3 |
G1/2 |
| Thông tin vật liệu |
RoHs compliant |
| Vật liệu thân |
Aluminium wrought alloy |
| Control output |
PNP |
| Signal range analogue output |
0 – 10 V |
| Signal range analogue input |
0 – 10 V |



