Van điều khiển VPCF-6-L-8-G38-6-V1-E-E (8041714)
Thông số kỹ thuật van điều khiển Festo VPCF-6-L-8-G38-6-V1-E-E – Festo 8041714 Proportional flow co
đại lý VPCF-6-L-8-G38-6-V1-E-E – đại lý 8041714
nhà phân phối VPCF-6-L-8-G38-6-V1-E-E – van điều khiển tỉ lệ festo 8041714
| Chức năng van |
3-way proportional flow control valve |
| Thiết lập |
Piston pusher |
| Loại điều khiển |
Direct |
| Kiểu truyền động |
Điện |
| Đặt lại cài đặt |
Spring magnetic |
| Dòng chảy |
Not reversible |
| Nguyên lý hoạt động |
arbitrary |
| Niêm phong |
Hard |
| Đường kính ngoài mm [mm] |
6 |
| Short circuit resistance |
yes |
| Display type |
LED |
| Flow measurement range [l/min] |
0 to 1000 |
| Áp lực vận hành [bar] |
1 to 6 |
| Flow control range [l/min] |
20 to 1000 |
| Information about flow control range |
Control is done from 20 l/min, below this target value the flow control valve is switched to the venting position |
| Repeatability in ± %FS [%FS] |
0,5 |
| Absolute precision in ± %FS at room temperature [%FS] |
3 |
| Hysteresis FS [%FS] |
0,8 |
| Nhiệt độ môi trường xung quanh [°C] |
0 to 50 |
| Nhiệt độ trung bình [°C] |
15 to 35 |
| Vận hành |
Compressed air to ISO 8573-1:2010 [6:4:4] |
| Thông tin về phương tiện vận hành và kiểm soát |
Oiled operation not possible |
| Cấp bảo vệ |
IP65 |
| Information about protection category |
In mounted condition |
| Cấp phép bởi |
RCM mark |
| CE certificate (see declaration of conformity) |
to EU EMC directive |
| ATEX gas category |
II 3G |
| ATEX dust category |
II 3D |
| Ex ignition protection type gas |
Ex nA IIC T5 X Gc |
| Ex ignition protection type dust |
Ex tc IIIC T60°C X Dc |
| Ex Nhiệt độ môi trường xung quanh |
0°C |
| Thông tin vật liệu |
RoHs compliant |
| Cường độ dao động |
Transport use test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Chống sốc |
Shock test with degree of severity 2 to FN 942017-5 and EN 60068-2-27 |
| Lớp chống ăn mòn KBK |
1 – low corrosion stress |
| Nominal operating voltage DC [V] |
24 |
| Operating voltage range DC [V] |
20.4 to 30 |
| residual ripple |
5 % |
| Max. power input [A] |
1,2 |
| Power input for unloaded outputs [mA] |
150 |
| Control output |
PNP |
| Control input |
PNP |
| Current carrying capacity per output [mA] |
100 |
| Reverse polarity protection |
for operating voltage |
| Thời gian bật nguồn |
100 % |
| Max. electrical power consumption [W] |
36 |
| Signal range analogue output |
0 – 10 V |
| Signal range analogue input |
0 – 10 V |
| Diagnose function |
Display via LED |
| Điện connection |
M12x1 |
| Loại buộc |
Direct fastening via throughway bores |
| Ren nối khí 1 |
G3/8 |
| Ren nối khí 2 |
G3/8 |
| Ren nối khí 3 |
G3/8 |
| Khối lượng [g] |
856 |
| Vật liệu thân |
Aluminium wrought alloy, anodised |
| Vật liệu gioăng |
FPM |



